Kirlian Photography is able to capture photographically the energetic emissions of a given object within a harmless high-frequency field. These emissions are the electrical field that a sample of energy-producing medium, such as your body (a fingertip) or monatomic/diatomic elements, produces and is surrounded by at all times. The spiritual community would refer to it as the "aura," while the scientific community might refer to it as a "Meissner" field. We used this method to "optimize" the energy output of a given sample through adjustments of quantities used, balances, acids, alkalis, etc., until we reached the highest energy output we could get, which in liquid form is Zynergy, and in powder form is Spiralight, although we haven't taken the time to capture its energy signature.
	The unit we're using enables you to place an object in the center of the photographic plate's field of view, so the camera is essentially looking straight up; in this image it would be looking straight up towards the subject's fingertip. There is a part that fits over the top of the circular area in this image that encloses the area and enables you to screw in a type of syringe containing the liquids being tested, which are depicted by the following photographs.
	This one is White Powder Gold produced in David Hudson's laboratory and reconstituted in double-distilled water. We include this one as a means of comparison and illustration. It is our contention that Earth is the best Alchemist, and we simply take and finish the final few alchemical steps that Earth has left for us. It's a beautiful energy, however, which shows the signs of what we call the "flower's stems" beginning to form in the center. As you'll see below, we're creating "Flowers of Life."
	This one is of distilled water. This water was distilled through a double distillation device that is one step short of deionizing (stripping it of everything but H20).
	This one is of the same distilled water with monatomic gold introduced into it at 1,000 parts per million (ppm). A very nice energy signature (our favorite terms) to be sure. This gold starts as 99.99% pure gold which is then transformed using an overunity device (discussed in the next paragraph) which converts the gold to a kind of ceramic-crystalline "solid," only 20% of which is readable by ICP analysis (inductively coupled plasma, a common analytical method) as gold according to the measurable ppms. Laurence Gardner of course discusses the "arc" or "ark" as also referring to electricity, which we've been using both experimentally and in production for years.
	This is Aquagold, but is the same distilled water sample with the 1,000 ppm monatomic gold introduced after having been energized with an overunity - or free energy - device that has an output of 150,000 to 200,000 volts with no transformers or other transforming devices to increase the electrical output from a standard 110 volt household outlet, thus the generation of free energy. A more balanced and complete energy signature is the result after "charging" it with this device, but the change in amplitude (size of output) was surprisingly small, which is an indication of the built-in energy emissions of monatomic gold (as seen in the previous picture).
	This photo is of an earlier stage of The Portal's development, during the "tweaking," or optimizing, phase, where we were discovering that when ICP analysis showed higher ppms of gold, the energy signature was actually reduced, jittery, asymmetrical. The simple conclusion is that the lower the gold ppms read by ICP analysis, the higher the energy output, which indicates that we were transiting out of the spectral range of the ICP's ability to "see" the gold as it was climbing higher in frequency in higher states of transition. The electrolytes and other elements (Portal ingredients) followed suit to some extent. This is before the addition of another very special "ore."
	This one is of a still later phase of development of The Portal. The energy output is obviously increasing as we continue improving it, and it's becoming more balanced, more symmetrical, nicely developing what we call the "flower's stems" but not really "flowering" just yet. We have had more than one gifted intuitive tell us that the "artifact" in the center is some sort of Hebrew symbology. In other tests and photographs, which were accidentally zapped from the computer, the Hebrew symbology argument was far more persuasive, as they very closely resembled "Yod" and "He" of the Hebrew alphabet.
	This picture is of The Portal after addtional "tweaking," but before adding diatomic indium (also made with the overunity device). As you can see, the "stems" now give way to "flowers." Symmetrical, balanced, big amplitude - really beautiful.
	This is the photograph of the energy signature of diatomic indium (Zindium). In the center is an artifact that seems to be a yin-yang symbol (notice the black dot on the left in the white field, and the white dot on the right in the shaded field), and because we have found Zindium to have such a potentiating and balancing effect on The Portal, the yin-yang concept (or effect) can't be too far off course. Their synergy when mixed together is profound, however, as you can see from the next photograph, which is of Zynergy. It's as though ancient symbology was remote-viewed at the atomic level by sages and adepts throughout the ages and it translates to substances that can transmute and transform at the atomic level.
	Zynergy, we nailed the target. The resulting output is larger, more energetic, more amplitude, balanced, symmetrical, more cohesive, the "stems" and "flowers" fully formed and rather stunning, and definitely in the higher vibrational (violet and white) color ranges when viewed in color, which is truly beautiful. We have noticed that when we bombard the samples with the Kirlian camera's energy, it actually absorbs it and briefly increases its energy signature, which is suggestive of superconductivity at room temperature, a hallmark of high-spin monatomics-diatomics-Bose-Einstein Condensates.
	This one is of ZP Powder at a phase prior to "finishing" it. Interestingly, between a phase about midway through the entire process and the final phase, the crystals are losing about 43% of their mass, but not their volume. This is very intriguing. Example: in one production run the powder crystals going into the final phases weighed 47 grams, but when "finished" weighed 26.7, all portions accounted for, including some lost due to purification, which is 56.8% of the original weight.
	This is the Rhodium at 1,000 ppm, made with the overunity device.
	This is the Iridium at 1,000 ppm, made with the overunity device.
	Now for Kirlian images of human fingertips. This one is of Test Subject A's fingertip before using six drops of Zynergy.
	Ten minutes after Zynergy. The bioelectrical emission and field has increased almost alarmingly, as is clearly discernible. These need to be seen in color to truly appreciate what has happened to the aura. We have had test subjects, whose photos were also somehow zapped (we can thank Microsoft for that), whose auras went to what we call the "white phase." The white phase showed us that the software couldn't extrapolate and superimpose color because, quite simply, it was white, which is of course the highest color in the visible spectrum and encompasses all other colors. Their auras had become "pure light" (from our point of view).
	Test Subject B's fingertip before using six drops of Zynergy.
	And ten minutes after. The electrical emission and field has increased in size and, let's call it, "voltage." Naturally, there are users, very few, who report feeling very little, or even nothing, but if we were to photograph their fingertips with the Kirlian Crown we're using they'd see that despite the fact that they can't feel it, it's still increasing the energy "output" of their subtle body considerably.
	These two show what Zynergy can do as an additive to an energy drink or fitness water, or even as a new product styled and branded on the new monatomics and/or diatomics. Six drops were added to eight ounces of distilled water and left to sit and blend thoroughly with the water, thus considerably energizing the water. This is the before photo.
	And this one was taken of the same person 15 minutes later.

--------------------------------------------------------------------------------
RELATED ARTICLES